The Bioquell L-4 is a mobile Hydrogen Peroxide Vapour generator that can be connected to enclosures and equipment in your facility or used for room/zone decontamination.
Ideal for:
Watch Video
| Download BrochureBioquell’s singular, proprietary technology for swift cycle turnarounds
Versatility with ability to connect to various pieces of equipment; quick and easy switch of decontamination from equipment to rooms
Thorough validation including equipment commissioning and IQ, OQ, GCD and PQ
Fast and easy set-up; quick push-in and push-out; over 300 pre-programmed gassing cycles
Connective capability for inclusion into more-complex systems; Modbus TCP/IP or volt-free contacts and remote start/stop for integration, automation and data capture
No need to wait for a limited temperature or humidity range to be reached as with other systems; faster start-up for more work achieved in less time
The strict and continual application of aseptic processing, environmental controls and monitoring are key to the approval and success of your final drug or product as a leading solution. With Bioquell’s automated, validated bio-decontamination, you have confidence in your bioburden elimination of your workspace and enhancements for sterility testing.
The risk and financial impact of microbial contamination is exceptionally high during the cell-production procedure, making aseptic conditions essential to the handling of cell samples. Performing as many steps as possible under isolation and following effective disinfection is the safest method. Our flexible bio-decontamination solutions allow you to maintain a secure, contaminant-free environment so you can develop and advance leading therapies and treatments.
Stringent manufacturing and compounding conditions call for leading bio-decontamination solutions. Whether operated by your staff members or one of our expert onsite technicians, our fixed and portable Hydrogen Peroxide Vapour bio-decontamination systems eliminate your airborne and surface contaminants in pass-throughs, airlocks and other areas for total working efficacy.
We understand biological safety is key to your research processes. That’s why Bioquell offers flexible bio-decontamination solutions for research facilities both large and small, allowing you to lead the way without a contaminant slowing you down. From your benchtop to your entire workspace, our mobile and built-in systems reduce your bioburden at every step of your workflow.
Connect to equipment, isolators and enclosures with the L-4’s standard capability.
Add Bioquell’s optional distribution head to decontaminate both equipment and small rooms.
With the optional Booster fan your system gains extra capacity to decontaminate large filter bank enclosures in less time and with reduced hydrogen peroxide consumption
Our rapid aeration technology connects to both the Bioquell L-4 and Bioquell Z-2 to reduce cycle times by removing our Hydrogen Peroxide Vapour quickly from rooms
Our rapid aeration technology connects to both the Bioquell L-4 and Bioquell Z-2 to reduce cycle times by removing our Hydrogen Peroxide Vapour quickly from rooms
The cycle end detector measures the low-level hydrogen peroxide concentration within an enclosure. It delivers a more accurate end of cycle reading than the high-level sensor in the generator. This low-level reading replaces the reading from the high-level sensor towards the end of the cycle, It is displayed on the generator screen and print out. This device is ideal for material transfer chamber or isolator applications where accurate end of cycle measurement is important to reduce cycle times. The Cycle End Detector reading must not be used as an indication for safe human entry into the bio-decontaminated enclosure. This should be done with an instrument which has been certified for this purpose.
Give your system even greater range with this optional accessory that expands the L-4’s capabilities from decontaminating equipment and enclosures to treating a full room
What will I need to do to make sure I can link this to my equipment?
We work with you to ensure everything you need is ready to decontaminate your equipment, from the necessary accessories to the connections required.
What is the maximum room size the Bioquell L-4 can decontaminate?
With the optional distribution head, the Bioquell L-4 could be used to decontaminate rooms up to 250 cubic meters. Contact us for more details.
When will I need a distribution head?
If you are looking to extend the capabilities of the system to decontaminate an open space, such as a room, then the distribution head would be required.
Can I connect this to my Building Management System?
Yes.
When will I need a Booster Fan?
If you are looking to decontaminate large filter bank enclosures with multiple filters systems, or single filter systems in a quicker time, then the Booster fan would be recommended.
The booster fan can also be used in small, fixed room decontamination systems to reduce cycle times
To learn more about how Bioquell can fit your solution, please contact us.
Ecolab Ltd
52 Royce Cl,
Andover SP10 3TS, UK
+44 (0)1264 835 835
bioquell.enquiries@ecolab.com
To learn more about how Ecolab Life Sciences can fit your solution, please contact us.
Ecolab Ltd
52 Royce Cl,
Andover SP10 3TS, UK
+44 (0)1264 835 835
bioquell.enquiries@ecolab.com
5490