Biological safety cabinet bio-decontamination

Our Solutions

Hydrogen peroxide vapour is an ideal method for providing a safe and effective method for the decontamination of Biological Safety Cabinets either routinely or prior to servicing or carrying out DOP test on the HEPA filters. Holding the decontamination at negative pressure means that the risk of hydrogen peroxide leakage is minimised thus negating the need to vacate the room during the decontamination process.

Make an enquiry

FAQs

Make an enquiry

Technical

Glossary

• Re-circulatory BSC’s: Typically the generator’s supply hose is connected to a purpose built connector either permanently fixed to the main chamber wall or via a temporary template taped across the front of the main chamber. The return hose is connected either via a connector off the same template for decontaminating just the main chamber or via a connector taped and sealed into place on the BSC extract grill for a full decontamination of chamber and HEPA filters.
   
• Ducted BSC’s: Typically the generator’s supply hose is connected to either a purpose built connector either permanently fixed to the main chamber wall or via a temporary template taped across the front of the main chamber. The return hose is connected either via connector off the same template for decontaminating just the main chamber or via a purpose built connector permanently installed on the extract duct between the terminal HEPA filter and the damper on the exhaust duct.
  A pressure sensor connector is also attached to the Biological Safety Cabinet to allow connection of the generator pressure hose to ensure that the cabinet is kept at negative pressure throughout the decontamination cycle.

Make an enquiry